Main Brickstuff Website

How to enable Javascript

Latest Posts

Re: AT-AT 75313 Hello everyone, well it's been a long weekend building our very own AT-AT! We finally picked up the kit from LEGO and this past weekend I brewed a giant pot of coffee and have it pretty much…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Millennium Falcon Dejarik Table Kit?? @Michael W Boatman Thanks, yeah the sheer accumulation of cables may be an issue. Though I was planning to run them all out under the seats to the open area behind the cavity in the Falcon.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Millennium Falcon Dejarik Table Kit?? Well, a little progress to report. The drilling went ok, and the mounting of the fibers was tough but not impossible. Did some basic testing with lights today but need to work on an improved way to…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- 2
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Millennium Falcon Dejarik Table Kit?? @Michael W Boatman We have three sizes of internal fiber: 0.5mm, 0.75mm, and 1.5mm. The cladding makes the overall cable thicker than this, but those are the internal sizes.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Millennium Falcon Dejarik Table Kit?? @Michael W Boatman Very nice. FYI we have some fiber optic wire in the shop with black cladding on the outside if you'd be interested in that, and if it would help with the light leakage.
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Wiring the Capitol / Capitol for modular transport and setup Just amazing to see how all of this is put together-- a true masterpiece! And there also does seem to be something poetic about the land the Capitol sits on being able to split right down the middle,…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Your Creations
- Reported - view
Re: 2001: a space odyssey - 1/8 Moebius POD build @Tobias Drewling One thing I did not mention is that for a small charge, we can load videos for you if you have them ready and if you need something other than the pre-loaded videos.
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- BrickScreen OLED and LCD Hobby Video Screens
- Reported - view
Re: 2001: a space odyssey - 1/8 Moebius POD build @Tobias Drewling Very nicely done!
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- BrickScreen OLED and LCD Hobby Video Screens
- Reported - view
Re: 2001: a space odyssey - 1/8 Moebius POD build @Tobias Drewling Hi, while it's a great idea to have the screens user-programmable, unfortunately this is not possible for a number of reasons. One big reason is that most of the screens we use are…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- BrickScreen OLED and LCD Hobby Video Screens
- Reported - view
Re: Stand Alone MP3 Sound Module & 4-Channel Micro-LEC with Machine Gun Effect @Helmut Senft OK, thank you. We'll work on finishing up the new module.
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Product Support and Issues
- Reported - view
Re: Stand Alone MP3 Sound Module & 4-Channel Micro-LEC with Machine Gun Effect @Helmut Senft Hello Helmut! We have your Ecto-1 ready to send and I also have prototypes (finally!) for the laser sound setup. I just want to ask: can it be ok to have 3 cannons maximum firing at…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Product Support and Issues
- Reported - view
Re: 2001: a space odyssey - 1/8 Moebius POD build Hello @Tobias Drewling , thank you for your post! We have one of the EVA pod models in our shop, and have had it for several years. Always looking for the best combination of screens to fit into…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- 1
- BrickScreen OLED and LCD Hobby Video Screens
- Reported - view
Re: US Capitol Night Flyover Amazing! The sound effect is a nice touch. 😎
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Your Creations
- Reported - view
Re: Compatibility Hi, thanks for your post. Our LEDs are fully compatible with SBrick, and you can use our PowerSpijk controller to have directional headlights, turnsignals, brake lights, etc.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Brickstuff Lights
- Reported - view
Re: Power Options Hi, thanks for your message. We do list some power details and options in the instructions that are included with the screen. Basically you just need a 5V power source capable of putting out at…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Power Options
- Reported - view
Re: The expanded Capitol Hill is 1/2 finished. Once again, you really have to do a double-take to realize you're not looking at the actual U.S. Capitol. Well done!
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Your Creations
- Reported - view
Re: BTS look at lighting the Lincoln Memorial Fascinating! Thank you for sharing your secrets.... 🧙‍♂️
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Customer Tips and Tricks
- Reported - view
Re: PowerSpijk-S Lighting Effect Controller Instructions @Donovan Ellis 🙂 Just a quick update-- we got the sample testing boards in house this week, and I was able to assemble a try out a few. They worked perfectly. I'm pretty excited, to say the least.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Intelligent Power System
- Reported - view
Re: Cool White LED Light Strips @Roy Brewer Thanks for the reply-- yes the current kit (without sound) does have remote control. We could certainly look to have the strip be an add-on.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- General DIY
- Reported - view
Re: Fully lit Lincoln Memorial Wow, just WOW. I'm scratching my head trying to figure out how you squeezed 42 lights inside that little space! So well done.
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Your Creations
- Reported - view
Re: Cool White LED Light Strips Hi. we've actually created a lighting kit for the docking bay-- not yet on our site, but we make them on an ad-hoc basis. There has been extensive discussion on this forum about it,…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- General DIY
- Reported - view
Re: PowerSpijk-S Lighting Effect Controller Instructions @Donovan Ellis Good question, yes the wires are very thin and the 4-wire plug on each end of the ring is small enough to fit through stud holes.
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Intelligent Power System
- Reported - view
Re: PowerSpijk-S Lighting Effect Controller Instructions @Donovan Ellis Thank you for your support and kind words! They mean a lot to us. Yes, once we have a working design for the adapter, our plan is to release kits for the sets you've listed,…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- Intelligent Power System
- Reported - view
Re: Cool White LED Light Strips Hi, thanks for your question. We've tested 100 strips connected in two "strings" to a single power input, so you should be able to scale to quite a large installation using that single power supply.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- General DIY
- Reported - view
Re: Boba Fett Slave 1 @Todd Chuma Wow, so well done. What Slave 1 model is that (manufacturer, etc.)?
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 3 yrs ago
- 1
- Your Creations
- Reported - view

1 9 10 11 12 13 70 Next

Back to top

moderator

Rob Klingberg

Rob_Klingberg

Chief Enthusiast

Rosemount, Minnesota, USA

1763
540
8

Joined: Sun Aug 14 01:27:56 UTC 2016

Follow

www.brickstuff.com

Tinkerer turned tech sales guy turned Chief Enthusiast. Started Brickstuff in 2011. Always amazed by the creativity of our customer community around the world!