Brickstuff Products

Any plans to bring 6-LED Rotating Multi-Color Beacon (2-Pack) with Controller back into production?…

Hi Everyone, I’m looking for the LEGO Creator Ecto-1 Premium Light and Sound Kit (Set #10274). Does anyone know, where I might be able to purchase this set? I’m open to buying second-hand, so if anyone has one for sale or knows where I could find one pre-owned, please feel free to let me know!…

Hi everyone, I’m looking for the LEGO UCS Millennium Falcon Light and Sound Kit VERSION 2 (Set #75192). Does anyone know where I might be able to purchase this set? I’m also open to buying second-hand, so if anyone has one for sale or knows where I could find one pre-owned,…

Hi Just getting this kit put together, got it from a friend who never had the time to install it. Just reading through the forum but have a question or two 1. Step 71 Connect the Laser Cannon Lights When powered up these are always on and bottom two "pulse.…

Does anyone happen to know if the new larger Briksmax connectors are compatible with the larger (older) connector style on the BrickStuff adaptor boards? Thanks in advance!…

I’ve been searching for a long time for a screen that I can use to display videos or images in my LEGO city as an advertising billboard. Ideally, it should fit within the frames of LEGO windows. Currently, I print out pictures on paper and insert them into the windows.…

Well, I'm back to working on my NaMaLiCS [National Mall Light Control System] after letting it sit on the back burner for quite a while. The system is based on the Brickstuff Arduino shield controlling the light setup. [Unfortunately I don't have any interesting video or photos to go with this post.…

I have a feeling the answer is "no," but is it possible to have the UCS Millennium Falcon engine lights stay lit in a "solid" light mode with no pulsing in brightness after the engine start sequence? It's mostly that the lights are quite bright and the pulsing light, when left on for a while,…

Hi, I am powering a large number of LEDs, lighting effects, and some small video screens through the 2 channel horizontal power connectors. The build is only about half done and it's drawing about 1040 mA. I may tap the power for a 9v motor off of the Brickstuff components with a step up converter,…

I have had my Falcon set aside for a few months while I rebuilt the Docking Bay. Long story short, everything was working just fine before I moved it (even tested after I moved it). Now that I have completed the DB rebuild I placed the Falcon back in the DB.…

I've purchased a pico flickering light. We are building a 1/48 scale hobbit hole inside a tin can. It's going into an old duct hole along the baseboards in front of a no-longer-used chimney. When you open the door, a switch will close and the flickering light will produce a faint glow in the hearth…

Hi Rob, I was wondering if you still have plans to release a light kit for the lighthouse? The lightmybricks one is pretty good and there is another company that make an inferior kit but with some cool sound effects (waves/seagulls etc).…

This is my tested setup for testing the two SmartPixel boards I have: This test was to see 1) the range of the 12C communications used to send control data to the boards 2) what changes were needed to the existing NaMaLiCS code to work with the boards 3) to see if the boards worked as Rob explained…

I'm changing my old NaMaLiCS code over from using the Brickstuff Arduino shield and Adafruit NeoPixel code to a new custom SmartPixel board. These test boards are directly accessible from the Arduino. The code difference is shown below.…

I see the Horizontal Magnetic Power Connectors (One Set, One Circuit) are out of stock again. Does the get them while they last indicate they will not be up for sale again??? I am going to run out again soon.…