Millenium Falcon engines not working
.
I got my kit up and working yesterday, and everything seems to be working except the engines. When I press the B on the remote, I do see the light on the remote module go out, but that is the only indication anything has happened. No sound, No lights on engines or hyperdrive. I have doublechecked the connections, and nothing seems loose. Any ideas as to what to look at next?
-
Hi, there is a master power setting (long press of button "A"). Maybe your master power is off? Try pressing the "A" button for 1-2 seconds, then try the other buttons again. Let us know if this fixes the issue.
-
I have tried that, and it didn't resolve the problem.
.I did remove the 3 connectors for the engines and hyperdrive and plugged them into a branch 04 board to verify that all the lights are working, and they are.
I have also checked the wires from the engines sound module, and they are properly seated in their connectors, and I do not see in loose wires, or other issues with the plugs.
Again, everything else appears to work. Is there any way to manually test the engine sound module? Or is this more likely an issue with the Trunk08 controller since the lights aren't coming on either?
-
Rob Dennis If the light on the remote receiver modules flashes when you press the buttons on the remote, then the issue is likely with the TRUNK08 board. I test each one individually before packing, so this would be unusual. Please send us an e-mail to support(at)brickstuff.com and we can arrange a replacement.