6-Channel Lighting Control with Antenna Beacon Effects--- Expansion Help !!!!!!

Hello :

I am embarking on part of my project and need some "Brickstuff Staff Technical Guidance ".

I currently have one " 6-Channel Lighting Control with Antenna Beacon Effects"  board.  I know I would need  several "6-Port BrickPixel Driver" boards to expand the number of "Beacon effect Lighting" lights I want to deploy.   

I am doing a perimeter fence Setup  (( Jurassic Park Style  ))  which will have 2 bit lights per fence pole.   I need to exceed the number of stated supported lights of "30" to  "64"    ---  at 6 bit lights per board , 11 boards with one board will use only 4 bit lights

My plan was use the 6-Channel Lighting Control with Antenna Beacon Effects board, and  then off the output port,  I would daisy chain  "11",  6-Port BrickPixel Driver Boards using the "BP" connecting cables,  giving me the 64 lights i would need in order for all lights to "Beacon"  at the same time.  (( a perimeter fence with Beacon blinking ))
 

My concern is that the Controller board product states only supports 30 lights.   Is there a way to expand to the number i need ??   additional Controller board ?? .    Any schematics , or visuals, or any suggestions  would be helpful if possible.     Please feel free to email me with any detailed information if possible.

Brianna