![](https://s3-us-west-2.amazonaws.com/media.forumbee.com/avatar/e35e74a241d02ccf9fb53c876d08352f-1620928955367/h/40.jpeg)
Back to the workbench
Well, I'm back to working on my NaMaLiCS [National Mall Light Control System] after letting it sit on the back burner for quite a while. The system is based on the Brickstuff Arduino shield controlling the light setup.
[Unfortunately I don't have any interesting video or photos to go with this post.]
Big changes from my previous test setup.
1) I have switched from using the Arduino IDE for programming to the VS Code IDE with the PlatformIO extension. That may sound like gobbledy-gook, but the VS Code IDE is a lot more comprehensive, however it requires more rigorous attention to your coding.
The Arduino IDE is not as powerful, but is **much** more forgiving. It's a better place for Arduino newbies to start.
2) The Arduino shield is talking to a couple of Brickstuff 8-Port Smartpixel Controller boards. Each controller board can be individually addressed, and each port on the board can also be individually accessed.
For me that means, I can independently control the streetlights on one port, the interior building lights on another port, the exterior building lights on a third port, etc for each section of the National Mall.
3) I currently have blinking lights on port 1, lights that toggle on and off on port 2, lights that fade on and off on port 3 and lights that flicker on port 4...all running simultaneously, yet independently.
4) I have also implemented a 12 minute lighting cycle that simulates 24-hours in real life. So I can...turn on these lights at 7 pm, those lights at 8 pm and turn off the first lights at 11 pm.
Sorry to bore you with all this, but I **had** to share with somebody and you folks are it...surprise!
[also posted on the Brickstuff Discord]