Main Brickstuff Website

How to enable Javascript

Latest Posts

Re: Hogwarts problem. Hi, thank you for your message. When you say your lights don't work, did you try the light test #4 in Step 102? Was everything working up until that point?…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: Analog instruments for Bae Hawk Hi Ozzie, thanks for your message. Sure thing-- could you send us an e-mail to support(at)brickstuff.com? We can take it from there. Apologies if you've already e-mailed us but we haven't…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Cinderella Castle Version 2 Middle and Upper Lights @Jill Mastandrea Hi Jill, thanks for doing the additional testing. OK one more thing to try that should give us a clue about the root cause: on the master controller (see Step 64),…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Set-Specific Kits
- Reported - view
Re: Magnetic Switch Set with a Coin Battery Pack As long as the magnetic switch is connected directly in line with the battery power, when it is "open" (off), there shouldn't be any battery drain. That's basically the same as using the on/off…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Control
- Reported - view
Re: Male to Female Extension Cable Hi Keith, that's a good idea, but unfortunately because the plugs we use are so small, they are not designed to be extended that way. You can't connect a plug directly to wire-- you need to mount it…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Expansion Accessories
- Reported - view
Re: Combining Sound and Lighting into a single action @Keith Huggins Thanks for the additional detail. For something like that, it might be better to let us custom-make something for you. Looking at that model,…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Lighting Effects
- Reported - view
Full Arduino Shield!
Over the years, we've had growing interest from Arduino users to control our LEDs and other products using an Arduino Uno. We're happy to announce that we will soon be releasing a full shield with…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 25replies
- 354
- 1
- Arduino
Re: Haunted house light kit number 2!!!! @Jaryd Carnovale Got it, thanks! Will send the PP invoice momentarily....
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Haunted house light kit number 2!!!! @Jaryd Carnovale Awesome, thank you. What country to you live in? Just need to know for postage calculations....
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Combining Sound and Lighting into a single action Hi Keith, thanks for your message. Is this something where you would like to be able to load your own sound onto a module (for example, lasers or machine guns),…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Lighting Effects
- Reported - view
Re: New here, and a couple questions @Jeremiah Shue For light strips, unfortunately no. The reason is a bit technical, but the driver chips provide enough current/power for only one LED per output.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Introduce Yourself!
- Reported - view
Re: IR controller board discontinued? @Stearns You are correct, that's really the only thing you lose. If you'd like an add-on cannon, send us an e-mail at support(at)brickstuff.com and I can send you a PayPal invoice. Price is $35.99.
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Brickstuff Lights
- Reported - view
Re: Broken part replacement @David Hi David, yes we're still running behind on shipping parts, but we will be sending your BRANCH04 this week. Yes, if you have two good plugs on the broken one,…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Front mandible wire unattached. Need replacement. @David Awesome to hear, thank you!
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Dynamic Digital Creations Viper MKII Lighting Project Hi @Calvin Summey , thank you for your message and for buying one of our DRADIS screens! We are working on a full kit for the Viper, so hang tight! We bought one of the DCC kits ourselves and are…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- Lighting Effects
- Reported - view
Re: IR controller board discontinued? @Stearns You're not losing any features. You've gained a ton of features over the original kit. Just because there are fewer buttons doesn't mean there are fewer features.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Brickstuff Lights
- Reported - view
Re: New Here, Simple Build Question @ColKlink Wow, what a great setup! It looks amazing-- thank you for sharing. The fire trucks remind me of the old LEGO wooden vehicles from the 1940s. I'm sure your grandkids will love what you've…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Introduce Yourself!
- Reported - view
Re: Cinderella Castle Version 2 Middle and Upper Lights Hi Jill, thanks for your note. Sorry for the trouble with your setup! As Paul mentioned, the first thing to do is check to see if power lights are turned on for your adapter boards.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Set-Specific Kits
- Reported - view
Re: Cinderella Castle Version 2 Middle and Upper Lights @Paul George Thanks Paul for the reply! Jill's kit is our new "v2" kit so the wiring is completely different.
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Set-Specific Kits
- Reported - view
Re: Haunted house light kit number 2!!!! Hi Jaryd, thanks for your note and for your interest in our v2 kit for the Haunted House! We do plan to make more in the coming weeks. If you would like to make sure you're first in line,…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Front mandible wire unattached. Need replacement. Hi David, thank you for your note. We can't open the image file you sent. If you can send us an e-mail to support(at)brickstuff.com with a photo in .jpg format, we'll take a look.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Powered Up adapter cable Hi All, one more update. We've tested our prototype with the Powered Up system (trains, etc.) and this week tested with the Control+ system (larger receivers).…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Powered Up adapter cable @Alex Burgess Thanks for the follow up. We are close to having a working prototype, and have been continuing testing during the quarantine times with the coronavirus.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Tsim Sha Tsui Clock Tower MOC with Lights Hi David, another great build, and more great lighting techniques! Having seen the "real" version of this tower several times, it is a great structure.…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Your Creations
- Reported - view
Re: New with Ninjago City Plans @Dan B Thanks Dan for the additional detail. Sounds like you are making progress figuring out the power situation. In terms of the lights, we could do some little effect controllers for you in…
- Rob Klingbergmoderator
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Introduce Yourself!
- Reported - view

1 29 30 31 32 33 70 Next

Back to top

moderator

Rob Klingberg

Rob_Klingberg

Chief Enthusiast

Rosemount, Minnesota, USA

1756
528
8

Joined: Sun Aug 14 01:27:56 UTC 2016

Follow

www.brickstuff.com

Tinkerer turned tech sales guy turned Chief Enthusiast. Started Brickstuff in 2011. Always amazed by the creativity of our customer community around the world!