Main Brickstuff Website

How to enable Javascript

Latest Posts

Re: New Millennium Falcon # 75192 @Rob Klingberg Makes sense. Appreciate the explanation.
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Rob Klingberg lighting kit looks great, nice work. Hope people respond to it well! Hooray for drilling! Question: what made you go with so many LEDs for the engine?
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 For the cannon, drilled through the long posts to feed the wires through (had to cut the connectors off then resolder). For the mount, used two L-brackets and then a few different metal mending…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 I'll get some pictures tonight/tomorrow on the cannon ontop as well as the stand.
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 Completed and mounted. Cannon alternates top/bottom lights. Happy to answer any questions or take different pictures if asked.
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini pictures of the engine assembly. I kept the grey grids, but moved them further into the ship to make room for the new assemblies. About 25 of these snap onto the top rung to create…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- 1
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini same exact method you shared. That is only one light. I haven't played around with any LEC effects on it yet. I'll take some pictures of each assembly tomorrow.…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 Engine MOC in progress...
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini @Rob Klingberg I've found that using a trans-cylinder defuses the light nicely. If you want it even more defused, use a white cylinder.
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini very nice. I decided I wanted all the Internal lights on one IR channel, all external lights on another, then the top side cannon on a final channel.…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini Just noticed you had the light ontop of the table...going to have to try that...AND DRILL!
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini Looking good. No need to drill for that room :)
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 Confirmed you can fit a pico led inside the half pin, but need to cut a lot of the PCB. Going to order some red LEDs and another LEC. Then going to bricklink some trans-red pipes (and hopefully some…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Brett Halper one down before I headed into work. Found it useful to drill halfway through from one side and then go from the other.
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Rob Klingberg nope, just a hand held drill! I did make a little jig from Legos to hold it.
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Rob Klingberg @Christian Nanini started to play around with this (laser cannon leds). The technic barrel is solid, so due to my ocd about having wires showing,…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: UCS Tie Fighter # 75095 @Rob Klingberg sure thing Rob. I actually just recently got back into Lego (since I was a kid), so not too many sets, but all good ones! I owe the forums a post on using Pico LEDs with flat plates…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- 1
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini love to see what you come up with for the table, that is the one piece I'm not thrilled about (not counting the engines... Yeesh they are bad).
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
UCS Tie Fighter # 75095
Rear engines using red studs with a flicker mode. Front cannons using green studs with a sequenced cannon mode. Cockpit has two Pico lights; red stud in the back corner,…
- Brett Halper
- Brett_Halper
- updated 6 yrs ago
- 2replies
- 691
- 2
- What Lights Do I Use For [a specific] LEGO Set?
Re: New Millennium Falcon # 75192 @Christian Nanini All my lights are the standard warm-white pico LEDs. Having the flexibility to use whatever plate/stud ontop is important. I cover almost all of my lights with some non-translucent…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: NASA Saturn V # 21309 @Rob Klingberg Yes, mounted to the wall. Two L-brackets and some nuts/bolts. Then I made two custom Technic brackets, one load berring that goes at the bottom between the engines,…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- 2
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
NASA Saturn V # 21309
To get the colors of the engine plume correct, the four outside engines use a trans-red plate (on top of the orange shield) while the center engine uses a trans-light blue plate.…
- Brett Halper
- Brett_Halper
- updated 6 yrs ago
- 7replies
- 1,741
- 4
- What Lights Do I Use For [a specific] LEGO Set?
Re: New Millennium Falcon # 75192 @Rob Klingberg Yes, I'm a working EE, so I'm capable. To your other post, yes I think it is worth doing. Given the popularity of the set, I think it should /will sell well for you,…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- 1
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Christian Nanini Meh, never going to sell it, so I have no problem making some permanent modifications
- Brett Halper
- Brett_Halper
- 6 yrs ago
- 1
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New Millennium Falcon # 75192 @Rob Klingberg thanks for the great information! I think I'll try to just add a series resistor on the flashing leds to lower the current. Alternatively,…
- Brett Halper
- Brett_Halper
- 6 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view

1 2 Next

Back to top

Brett Halper

Brett_Halper

32
13
0

Joined: 01 Oct 2017

Follow