Dino Tempesti Hi, the lights and effects boards are actually 100% custom for this kit, not available separately, since we need to fit almost 30 LEDs into a very tiny space.  What LEDs do you have?

Dino Tempesti OK I see what you'e referring to.  The video showed the larger effect boards, which are compatible with our Pico LEDs.  If that's what you're looking for and you have the Pico LEDs already mounted inside the LEGO parts, I can sell you just the controller boards that are shown in the video-- there are three total boards.  But you will need to cut and solder wires in order to make everything work-- there are a total of 21 LEDs in the roof, and only six plugs on the effect boards, so custom connecting wires and soldering are required if you want to do this yourself.  This is the reason we make the kit with the lights and wires pre-installed and pre-soldered, so you can just replace your existing Ecto-1 roof with our roof.

If you want to do the do-it-yourself route, with cutting and soldering wires, let me know and I can send you a PayPal invoice for just the effect controllers.

Thank you.

Dino Tempesti Ok good, if you are ok soldering then this would work.  How many of our Pico LEDs do you currently have?  The full setup requires 29 total LEDs.  Several years ago we put together the attached diagram for people wanting to do their own lighting connections.  Have a look and let us know if this helps explain.

Assuming you have all of the LEDs needed, the prices for each additional needed part are:

• $17.99 for each 2-port effect controller
• $28.99 for the 4-port effect controller
• $4.68 for the BRANCH03 adapter board (if needed)
• $3.98 for the BRANCH04 adapter board (if needed)
• $6.99 for the battery box (if needed)
• $18.99 for the BRANCH11 adapter board (if needed)
• $5.99 for a 4-pack of 6" cables
• $1.12 for the additional 12" cable needed to connect the headlights

I hope this helps clarify-- please let us know if you have any additional questions, and if you would like to move forward with an order, you can send the list of items needed to support@brickstuff.com and we will send you a PayPal invoice.

Thank you!

Dino Tempesti Hi, as I mentioned, the Ecto-1 kit is custom, so the parts for it are not on the website to order individually.

So it sounds like you just need the 2-port controller for the roof and the 4-port controller for the roof as well?  Did you want the 2-port controller for the strobes under the front hood?

Dino Tempesti Sounds good, I see your e-mail in our support system and will send a PayPal invoice for the 2x 4-port boards today.  Thank you very much!