Rob Klingberg's Profile | Community: Brickstuff Hobby Electronics

Skip to main content

Online User Forums

Latest Posts

Re: Lights for the 76023 Tumbler
@William C Cheezum Jr With these large Technic-based models, the good thing is that there is always plenty of space inside to hide excess wires, and the Technic parts with holes in them actually…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
@Rick rivera This was a tough one to tackle, design-wise. In the end I decided to go with a really simple solution: we'll include with our kit a clear round 1x1 brick and round tile to go on top.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 3
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
Hi all, another update! Last week was spent trying to iron out the performance issues I'd discovered, and on Friday I was finally able to conquer them!…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 4
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Lighting the Imperial Star Destroyer The Eviscerator from BrickVault
@Carl Hoff Good stuff, thanks Carl for sharing. Yes, you are correct, in recent months we have updated our BRANCH10 adapter board so that it now has 10 connectors instead of the 9 that were on the…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: littleBits + Power Functions motors
@EJ Mak Have you seen these? https://circuitcubes.com/collections/cubes Looks perfect for what you're trying to do, though not using PF motors.
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: Time
@Grayson Sure, here you go. Remember, as we say on our webpage, that shipping is taking much longer than normal because of Covid.
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: Time
@Grayson Yep, should all be good. If not let us know.
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
@Dennis Wiiniciaki Valdez-King Of course! Already have them working with the movie-accurate double-flash.
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Lighting the Imperial Star Destroyer The Eviscerator from BrickVault
Hi, thank you for your message! We're working on a kit for the "smaller" Star Destroyer (the standard UCS LEGO Set) and this kit should fit into the Brickvault set as well.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Time
Hi, you placed your order on Saturday afternoon. We ship really fast, but we're also a small family company so we take the weekends off. Your order shipped today (Monday).…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: Flickering Lights Blinking instead
Hi, thanks for your note. Yes, flickering lights are not compatible with the power boost circuitry of the SEED13. The SEED13xs does not have this boost circuitry,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
Hi all, well I ran into some challenges this weekend-- all of the lights are connected and working just as I'd imagined them, but I need to get the sound (siren, engine) working as well.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 3
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: USB Power Cable DIY?
Hi, thanks for your message. Are you looking for something like this? https://www.coolerguys.com/products/usb-male-a-to-bare-wire-18
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General DIY
- Reported - view
Re: Stand alone sound module.
Hi Neil, thanks for your post! Yep, those two parts are all you need. Only caveat is that the sound plays once each time the button is pressed, so you can't technically do a loop.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: Motorized Boarding Ramp (Falcon)
@MS Good question. Once you install this kit, you can no longer manually move the ramp. You can easily switch back though without uninstalling the kit by removing one piece in the rear of the Falcon,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Set-Specific Kits
- Reported - view
Re: Pico to Standard Adapter Cable
@Chris Lewis OK, sounds good. Of course you could always make your own cables too with these two parts: https://www.brickstuff.com/store/p18/diy-jst-cables-for-arduino.html https://www.brickstuff.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
Hello Ecto-1 fans, just finishing a late night of coding tweaking the lighting routines for the kit, and I hope to have some teaser video to show you here in the next few days.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
@Sean Awesome, thank you Sean!
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Pico to Standard Adapter Cable
Hi Chris, thanks for your message. Looking at your comments and then also at the product page for the SED13XS, I see my mistake. You are correct that the board does only have two connectors,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Motorized Boarding Ramp (Falcon)
Hi Manny, yes you are correct-- the new add-on works with your existing remote and the code to control the servo is already loaded onto the TRUNK08 master controller you already have in your Falcon.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- Set-Specific Kits
- Reported - view
Re: Disney Castle - Test Lights
Hi Michael, yes, as long as you're past Step 47 in the instructions (where the remote and main controller are connected), then you can test what you've connected.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Do you have a kit for the UCS Death Star II set?
@Mark Freeman Hi Mark, thanks to Covid, we lost a lot of kit development time in 2020. Still tossing ideas around though. Our next Star Wars kit will likely be the Star Destroyer UCS,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: BRANCH09XS Disney castle missing
@Lee Ann Brown Hi Lee Ann, thank you for your message. Sorry for the missing part! We will put it in the mail to you this week.
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- Customer Tips and Tricks
- Reported - view
Re: Holiday Wreath MOC (aka “Seasonal Circle”) by LegoAtVrieswol
@David Steere wow, just wow! I knew this would be a special project, and now seeing it completed, I wish I had one too! Just amazing. Your engineering and planning to get it stable enough to hang…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Your Creations
- Reported - view
Re: Magnetic Power Connectors for Trains
@Scott Beasley Hi Scott, thank you for your post and for your interest in these connectors! We actually have 3-D printed some holders for the magnets themselves that make mounting into the standard…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Expansion Accessories
- Reported - view

1 20 21 22 23 24 70

Back to top

Home

View all topics

Main Brickstuff Website