Rob Klingberg's Profile | Community: Brickstuff Hobby Electronics

Skip to main content

Online User Forums

Latest Posts

Re: Flickering Lights Blinking instead
Hi, thanks for your note. Yes, flickering lights are not compatible with the power boost circuitry of the SEED13. The SEED13xs does not have this boost circuitry,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
Hi all, well I ran into some challenges this weekend-- all of the lights are connected and working just as I'd imagined them, but I need to get the sound (siren, engine) working as well.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 3
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: USB Power Cable DIY?
Hi, thanks for your message. Are you looking for something like this? https://www.coolerguys.com/products/usb-male-a-to-bare-wire-18
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General DIY
- Reported - view
Re: Stand alone sound module.
Hi Neil, thanks for your post! Yep, those two parts are all you need. Only caveat is that the sound plays once each time the button is pressed, so you can't technically do a loop.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: Motorized Boarding Ramp (Falcon)
@MS Good question. Once you install this kit, you can no longer manually move the ramp. You can easily switch back though without uninstalling the kit by removing one piece in the rear of the Falcon,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Set-Specific Kits
- Reported - view
Re: Pico to Standard Adapter Cable
@Chris Lewis OK, sounds good. Of course you could always make your own cables too with these two parts: https://www.brickstuff.com/store/p18/diy-jst-cables-for-arduino.html https://www.brickstuff.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
Hello Ecto-1 fans, just finishing a late night of coding tweaking the lighting routines for the kit, and I hope to have some teaser video to show you here in the next few days.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
@Sean Awesome, thank you Sean!
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Pico to Standard Adapter Cable
Hi Chris, thanks for your message. Looking at your comments and then also at the product page for the SED13XS, I see my mistake. You are correct that the board does only have two connectors,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Power Options
- Reported - view
Re: Motorized Boarding Ramp (Falcon)
Hi Manny, yes you are correct-- the new add-on works with your existing remote and the code to control the servo is already loaded onto the TRUNK08 master controller you already have in your Falcon.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- Set-Specific Kits
- Reported - view
Re: Disney Castle - Test Lights
Hi Michael, yes, as long as you're past Step 47 in the instructions (where the remote and main controller are connected), then you can test what you've connected.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Product Support and Issues
- Reported - view
Re: Do you have a kit for the UCS Death Star II set?
@Mark Freeman Hi Mark, thanks to Covid, we lost a lot of kit development time in 2020. Still tossing ideas around though. Our next Star Wars kit will likely be the Star Destroyer UCS,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: BRANCH09XS Disney castle missing
@Lee Ann Brown Hi Lee Ann, thank you for your message. Sorry for the missing part! We will put it in the mail to you this week.
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- Customer Tips and Tricks
- Reported - view
Re: Holiday Wreath MOC (aka “Seasonal Circle”) by LegoAtVrieswol
@David Steere wow, just wow! I knew this would be a special project, and now seeing it completed, I wish I had one too! Just amazing. Your engineering and planning to get it stable enough to hang…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Your Creations
- Reported - view
Re: Magnetic Power Connectors for Trains
@Scott Beasley Hi Scott, thank you for your post and for your interest in these connectors! We actually have 3-D printed some holders for the magnets themselves that make mounting into the standard…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Expansion Accessories
- Reported - view
Re: littleBits + Power Functions motors
@EJ Mak Thanks, it does. Sounds like you're looking for a whole new LEGO-to-LittleBits interface, which unfortunately is beyond what we can supply. We tried working with LittleBits years ago,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- General Questions & Answers
- Reported - view
Re: littleBits + Power Functions motors
Hi there, thanks for your post-- I'm glad you found our little corner of the Internet! We have experimented with LittleBits in the past, back when they first came out,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- General Questions & Answers
- Reported - view
Re: Lighting the Palace Cinema Marquee
@Donald Whelan Yes yes yes! All parts are complete. I just need to write the instructions and then we will have these up on the website. We're also going to be releasing another surprise kit for…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 2
- Customer Tips and Tricks
- Reported - view
Re: [WIP] DeLorean DMC-12 Timemachine (Back to the Future)
@Jonathan Benaim LEGO do sell some parts directly on their website, but many of the parts in this set are either out of production or in colors that are out of production.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Your Creations
- Reported - view
Re: [WIP] DeLorean DMC-12 Timemachine (Back to the Future)
@Jonathan Benaim As @Freakmaster says, these designers work very hard on making great models and then putting in hundreds of additional hours to document them and show the rest of us how to build…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Your Creations
- Reported - view
Re: Lights for the 76023 Tumbler
@William C Cheezum Jr Thanks for finalizing the list-- I can make up a PayPal invoice for you. Just one question-- what lengths on each of the wires? We can do 3", 6", 12", or 24".
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
@Tracy Myers Hey Tracy, thanks so much for your post, kind words, and support. It means the world to us that fans like you are willing to share their input for kit design and to hold out until we…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: Light and Sound Kit for the 2020 Creator Expert Ecto-1 (#10274)
@Nate Awesome suggestions, I did pick up that Haynes manual-- great stuff. Thanks especially for the info about the emergency mode for the headlights-- I had that effect programmed in my testing,…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- What Lights Do I Use For [a specific] LEGO Set?
- Reported - view
Re: New UCS Lego Star Destroyer 75252
@Brian Bille Got it, thanks. Right now our kit queue looks like this: first, finish the kit for the new Ecto-1, then finish the upgraded kit for the Ghostbusters Firehouse, then finish the SSD kit.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- 1
- Set-Specific Kits
- Reported - view
Re: New UCS Lego Star Destroyer 75252
@Brian Bille OK, good to know! I'll see if we can incorporate this as an option. But we wouldn't be able to provide instructions for installing the fiber, since we wouldn't modify our own kit.…
- Chief Enthusiast
- Rob_Klingberg
- 4 yrs ago
- Set-Specific Kits
- Reported - view

1 21 22 23 24 25 71

Back to top

Home

View all topics

Main Brickstuff Website