-
Adding a Brickstuff Ultrasaber to the UCS Millennium Falcon?
Hello, just another quick question. I want to make a scene in the holochess/seating room of the UCS Millennium Falcon with Luke practicing his lightsaber with Obi-Wan as a tribute to A New Hope.…
General Questions & Answers -
Can you turn the sound off on the Millennium Falcon UCS kit?
Hello! My name is Chris and I just purchased the Millennium Falcon UCS kit. I'm still building the falcon and won't be doing the light and sound install for another 1-2 weeks.…
General Questions & Answers -
how to add switch in series with small-plugs connection bay
I've purchased a pico flickering light. We are building a 1/48 scale hobbit hole inside a tin can. It's going into an old duct hole along the baseboards in front of a no-longer-used chimney.…
Brickstuff Lights -
Lego Lighthouse 21335 Light Kit
Hi Rob, I was wondering if you still have plans to release a light kit for the lighthouse? The lightmybricks one is pretty good and there is another company that make an inferior kit but with some…
Set-Specific Kits -
Falcon upper cannon
Hi I was able to get the system to recognize both upper and lower canon's on the Millennium Falcon light and sound kit, the bottom cannon fires all 4 and works fine,…
Product Support and Issues -
Light and Sound Kit for New LEGO Haunted House (#10273)
Hello everyone! We know it's getting close to Halloween, and we've had questions about whether we are going to make a light and sound kit for the new 2020 LEGO Haunted House (#10273).…
What Lights Do I Use For [a specific] LEGO Set? -
Stand Alone MP3 Sound Module & 4-Channel Micro-LEC with Machine Gun Effect
Hello Rob, I have for my dockingbay a Lego Laser Cannon (set 75034) and I'm looking the get light in synconised sound on that. Therefore I have the gun effect board and the sound module and I…
Product Support and Issues -
M2 machine gun with lights and sound speaker connection issue.
I had the awesome opportunity to visit the Miramar Brickmania location, i had purchased the m2 machine gun with lights and sound but i realised as i got home and upackaged the item the sound wasnt…
Product Support and Issues -
August 2023 update: Last batch-- get 'em while they last!
I see the Horizontal Magnetic Power Connectors (One Set, One Circuit) are out of stock again. Does the get them while they last indicate they will not be up for sale again???…
Expansion Accessories -
MF docking bay led light pack have bare wires
Onto step 44 and found out 6 out of the 8 docking bay led light pack all have one strand of bare wire, not covered with red plastic in this case. Top two wires are good. Not so for the bottom 6.…
Product Support and Issues -
Star Wars Docking Bay 327
Here are some pics of my finished Docking Bay 327 MOC. The MOC is by Cyberlogic (giving credit to where it is due!) - MOC 21331 on Rebrickable. I redesigned the floor to accommodate running the…
Your Creations
-
Best Ways to Hang or Suspend LED Filament?
Hey Team, I was wondering if anyone has come up with good ways to hang or suspend LED filament underneath a platform? I’m building a train station and would like to light the platform using filament…
Customer Tips and Tricks -
Testing the new SmartPixel boards
This is my tested setup for testing the two SmartPixel boards I have: This test was to see 1) the range of the 12C communications used to send control data to the boards 2) what changes were needed…
BrickPixel Lighting System -
What a difference a year makes!!
I'm changing my old NaMaLiCS code over from using the Brickstuff Arduino shield and Adafruit NeoPixel code to a new custom SmartPixel board. These test boards are directly accessible from the Arduino.…
BrickPixel Lighting System -
Haunted House
Do you feel there would be enough interest in lighting this set to develop a kit for it?
What Lights Do I Use For [a specific] LEGO Set? -
Sealed lights - epoxy - gonna get weird?
Yes, I’m still alive. LEGO woefully neglected during a fitful bout of adulting. But a project idea has gone from simple (table for the fire station) to a river center table concept to a vinette of…
General Questions & Answers -
Remote needs re-syncing for my Disney Castle kit?
I bought a Disney castle kit back in 2021 (it was a Feb pre-order), I needed to move my castle to a different shelf I had and needed to unplug it. When it did that I notice the button on the remote…
Product Support and Issues -
Faulty light screens
Wow! Now you're going to just ignore me. Not a good business practice.
General Feedback -
6 Port BrickPixel Driver Board to Arduino
Found that there was the possibility that the HAT would be getting a revamp soon, so I started working one some code for a runway effect. Testing with an LED strip works as I would expect,…
Arduino -
brick screen
on looking at your site . are you going to releases the aircraft?0.96 screen? if not can have one made. For my custom cockpit? for my Caprica viper in 1/17 scale. How can get it soon, thanks
BrickScreen OLED and LCD Hobby Video Screens -
Compatibility with LightMyBricks
I purchased LightMyBrick's kit for Hogwarts but I'd like to control the lights with an Arduino. Your shield looks incredibly interesting but is it compatible with components from LightMyBricks?…
General Questions & Answers -
Falcon Kit Feeback
A truly awesome kit!!! A++++ Below are some minor comments I have: 1. Power: I combined the two power lines and supply power with a single 20W USB module. I have no issues with it. 2.…
Set-Specific Kits -
Circuit Cube interface
Hi Brickstuff (Rob) I would love to see some interfaces for circuit cube. I have started using the cubes in locomotives and cars that dont have the space for traditional lego motors and i would love…
New Product Ideas
